CyberWar

Si Vis Pacem, Para Bellum

By

Tonor TM RJ45 RJ11 RJ12 CAT5 CAT 6 UTP Network Lan Cable Tester Test Tool

Rating: 
Amazon Price: $20.99 $8.99 You save: $12.00 (57%). (as of March 25, 2017 16:57 – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Features:
Following are abnormal connections:
If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on.
If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.
If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:
Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.
If test patch panels or wall plate outlles, two cables which can match each other (RJ45) will be connected to the tester.
If test cables of the same axes, BNC turns on when the cable works.
9V reduplicated battery is used in this tester. Battery is advised to change if any weak light appears.( Battery is not included.)

Color: white
Main tester
Size: 105*67*28mm
Weight: 74g
Remote tester
Size: 105*38*28mm
Weight: 47

By

Dualcomm DCGS-2005 5-Port 10/100/1000 Gigabit Ethernet Switch Network TAP (USB Powered, Port Mirroring, PoE Pass-Through)

Rating: 
Amazon Price: $199.95 $199.95 (as of March 25, 2017 06:07 – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Dualcomm's patent pending 10/100/1000Base-T gigabit network TAP (DCGS-2005) is a portable hardware device for capturing bi-directional inline traffic of an Ethernet link segment. It is usually used for network intrusion detection systems, VoIP recording, network probes for monitoring and trouble-shooting, and etc. DCGS-2005 implements PoE inline power pass-through between two inline ports, which allows DCGS-2005 to be placed inline between a PoE switch and PoE powered device such as an IP phone or access point without blocking the POE inline power from the PoE switch to reach the PoE powered device. DCGS-2005 is also designed to be conveniently powered by a USB port so that an otherwise heavy and bulky AC/DC power adapter becomes not necessary! DCGS-2005 can also function as a 5-port Gigabit Ethernet Switch.

By

iDsonix IDD-U3201-1 USB 3.0 Super Speed Dual Bay 2.5-Inch & 3.5-Inch SATA Hard Drive Docking Station

Rating: 
Amazon Price: $79.99 $29.99 You save: $50.00 (63%). (as of March 25, 2017 13:55 – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

iDsonix® IDD-U3201 USB3.0 SATA Hard Drive Dual Bay Docking Station offers swappable access to 2.5" and 3.5" SATA HDD, without having to mount the hard drive or installing it in an enclosure. iDsonix IDD-U3201 provides a simple, fast, and cost effective solution for data recovery, drive imaging, and testing centers, or any environment that requires fast access to uninstalled/archived drives.

Features:
Read More

By

Oscium WiPry-Pro Combo, iPhone iPad Spectrum Analyzer & Power Meter

Rating: 
Amazon Price: $299.97 $299.97 (as of March 25, 2017 21:29 – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Use your iPhone, iPod and iPad to make power and frequency measurements. All the measurement capabilities you need for RF communication design and wireless network integration fit in the palm of your hand with WiPry-Pro Combo. Measure rise and fall time, duty cycle and peak power with WiPry-Pro Combo's precision power meter. Switch to spectral mode to examine the 2.4GHz ISM band used by Wi-Fi, Zigbee, Bluetooth and remote sensor networks. SSID's / RSSI are also available. WiPry-Pro Combo is the emerging standard in handheld RF test equipment for cellular communication planners, RF engineers, wireless network technicians and avid electronics hobbyists. Just like oscilloscopes that measure analog and digital voltages, WiPry-Pro Combo captures time based peak RF power. Analyze measured signals for pulse width, duty cycle, and settling time performance. In addition to peak power, WiPry-Pro Combo also lets you measure key parameters like peak-to-average power ratio. These measurements, essential for verifying signals, are compliant with regulations and measuring transmission efficiency. Switch to spectrum mode and spectral content can be viewed between 2.4 GHz and 2.495 GHz. The intuitive interface lets you see all Wi-Fi channel activity. Just touch the screen and slide your finger left and right to view channel activity. WiPry lets you adapt the Real Wave spectrum analysis to suit your application. Choose from six measurement visualizations, including Max Hold, Raw, Average, and Heat Map. Spectrum analysis can also be viewed over time using the waterfall option. WiPry-Pro Combo works on the following generations of iPhone, iPad, and iPod touch devices: iPad Pro, iPad 4, iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad mini, iPod touch (5th generation), iPhone 6S Plus, iPhone 6S, iPhone 6 Plus, iPhone 6, iPhone 5, iPhone 5S, iPhone 5C. WiPry-Pro Combo is built to support the lightning connector natively.

By

WiPry-Combo

Rating: 
Amazon Price: $199.97 (as of March 25, 2017 12:59 – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Currently unavailable

Use your iPhone, iPod and iPad to make power and frequency measurements. All the measurement capabilities you need for RF communication design and wireless network integration fit in the palm of your hand with WiPry-Combo. Measure rise and fall time, duty cycle and peak power with WiPry-Comb's precision power meter. Switch to spectral mode to examine the 2.4GHz ISM band used by Wi-Fi, Zigbee, Bluetooth and remote sensor networks. WiPry-Combo is the emerging standard in handheld RF test equipment for cellular communication planners, RF engineers, wireless network technicians and avid electronics hobbyists. Just like oscilloscopes that measure analog and digital voltages, WiPry-Combo captures time based peak RF power. Analyze measured signals for pulse width, duty cycle, and settling time performance. In addition to peak power, WiPry-Combo also lets you measure key parameters like peak-to-average power ratio. These measurements, essential for verifying signals, are compliant with regulations and measuring transmission efficiency. Switch to spectrum mode and spectral content can be viewed between 2.4 GHz and 2.495 GHz. The intuitive interface lets you see all Wi-Fi channel activity. Just touch the screen and slide your finger left and right to view channel activity. WiPry lets you adapt the Real Wave spectrum analysis to suit your application. Choose from six measurement visualizations, including Max Hold, Raw, Average, and Heat Map. Spectrum analysis can also be viewed over time using the waterfall option.

/* */